Copper and Brass Kitchen Mixer Taps, Belfast Sink Taps - Wall Mounted

Are these suitable for commercial use?
- No. All of our taps are designed for domestic use only, indoors or outdoors, and are not sold as suitable for commercial premises.

Do these taps swivel?-No these taps do not swivel, they are fixed.

Can I order more than the quantity currently shown?
-Yes. We often have more available than shown in the listing, but we limit stock numbers online to help maintain our dispatch times. If you would like a larger quantity, please contact us and we can increase the listing.

Are your taps made to order?
-Yes. All of our taps are made to order with a usual dispatch time of 3–5 working days. If your order is urgent, please contact us via Live Chat before purchasing, as earlier dispatch can often be arranged.

These measurements are not suitable for me, can these be made to different measurements?-These taps are made to measure at no extra cost within the dimension options, There is a little room for adjustment and we will do our best to accommodate. Please contact us with your sizes and we will check that they can be made to your requirements. A little sketch is often the best way to clearly show measurements.

Can I return the taps if they are unsuitable?
-This specific listing is for a custom size made to measure set which are made specifically to your own measurements therefore they are non refundable. -  Bespoke items are exempt from The Consumer Act 2015 and Distance Selling Regulations and cannot be returned if you have mis-measured or they are unsuitable.

Do you sell other copper and brass tap styles?
-Yes. We offer over 20 styles, including single taps, pillar taps, wall-mounted taps, and deck mounted mixer taps. Please see our Copper Sinks and Taps section for the full range.

What size is the water inlet pipework?
-All of our taps have a standard UK 15mm copper water inlet pipe below the counter.

I have exposed pipework - Do you sell an option for this?
-Yes we do - please see the following listing :- Wall mounted option for exposed pipes

What will I receive and do I need to assemble it myself?
-You will receive a complete mixer tap with brackets ready to fit. This includes fitting screws. The tail end copper pipe is supplied - this does not come off for fitting - it is pre soldered and you will need full access to the pipes behind your wall to fit these. The top swan neck is unscrewed for safer posting, this screws back on with a standard spanner.

Will the 15mm pipework fit if I am buying from outside the UK?
-Our taps are made with standard UK 15mm inlet pipework, so suitability will depend on the plumbing standard in your country. In many cases, where local pipework is a different size, adaptors are available. We recommend checking that a suitable adaptor can be sourced locally if needed, before purchase if you are ordering from outside the UK.

Can these be fitted directly into a basin or sink hole?
-No. These taps do not fit into basin or sink pre cast holes. They are designed to fit into a wall. They are fitted by screwing the brass base into the wall using the screws provided. They are not fitted using a back nut.

Can these be used with a bath?
-These taps will be suitable for some baths, although they are generally sold for basins and sinks as they have a water inlet pipe which is 15mm. Some baths, particularly in older houses have a water inlet pipe of 22mm. Please check with your plumber or fitter if you are unsure of your pipe size if you are buying these for a bath.

Can these be fitted in a camper van or shepherd’s hut?
-Yes. Our taps are often used in camper vans, shepherd’s huts, and horse box conversions. Please note that camper van pipework is often smaller than standard 15mm, so a reducing fitting may be required.

Can these be used outdoors?
-Yes. All of our taps are suitable for outdoor use.

How do I connect the tap to my water inlet?
- All of our wall mounted taps are designed to be fitted by screwing the complete unit directly onto the front of the wall.

Please note that these taps are supplied as fully soldered, complete units and do not come apart. Full access to the pipework behind the wall will be required in order to connect the taps to your water supply.

Before purchasing, please ensure that your installation allows the taps to be mounted in this way and that the pipework can be connected from behind the wall. If you are unsure, we recommend checking with your plumber before ordering, or contacting us for advice.

The water inlet pipe can be connected to the tail end using soldered fittings, compression fittings or suitable push-fit fittings, depending on your installation requirements.

Can these be fitted as a direct replacement for my existing wall mounted taps?- Probably not. These taps are made to be screwed onto the front of a wall where existing access behind is available in order to connect the pre soldered tail ends to your mains water supply, this is usually where a house is having a refit or a new build rather than as a direct swap. These are designed and supplied as complete units already soldered together. They do not come apart and cannot be fitted to copper pipe protruding from an existing wall. The water inlet pipe must be connected behind the wall. Please check with your fitter or message for advice before buying if you are unsure.

How do I keep the copper and brass shiny?
-Copper and brass will naturally tarnish over time. To keep them polished, we recommend a quick clean every week or two using Brasso wadding or a similar metal polish. If you prefer a darker, aged patina, simply leave the metal unpolished and it will develop naturally over time.

When will my order arrive?
-Our usual dispatch time is 3–5 working days as each tap is made to order. Orders are normally sent by Royal Mail Tracked 48, or Tracked 24 for urgent orders where agreed.

Can I ask for advice before buying?
-Yes. We are always happy to help with questions about size, fitting, or style. Please contact us via Live Chat or our online contact form.

Can I speak to a real person?
-Yes. The quickest way to reach us is via Live Chat, where you will speak directly with Louise or Martin, not a chatbot. If you would prefer a call back, you can leave a message on 01772 494985 or send your contact details via live chat, contact form, or email.

All taps are made to order and shipped within 3-5 working - please contact us on live chat before buying if you need these urgently. Shipping is free for all UK orders. See below for shipping outside the UK

We are now shipping our taps and basins to a limited number of countries outside the UK including USA - Unfortunately we cannot ship taps to the EU or Ireland - **For taps please be sure to check your pipe size matches the UK standard 15mm.

**For Basins please check that you can accommodate the standard 1 &1/4 inch basin waste that is supplied**

*Combined shipping* - If you are buying a basin or taps with any other item, please contact us first so we can combine overseas postage