XL Copper & Brass Tap – Made to Measure Rustic Kitchen Tap - Bathroom Tap

Due to the size of this specific tap once boxed it is not available for shipping outside the UK as standard at checkout. However, if you interested and are based in USA, Canada or Australia, please feel free to contact us and we can quote for shipping.

Is this suitable for commercial use?
- No. All of our taps are designed for domestic use only, indoors or outdoors, and are not sold as suitable for commercial premises.

Can this be used as a monobloc tap?
-Unfortunately not - this is a single feed tap which can be either hot or cold feed but not both.

Can I buy a pair of taps?
-Yes. Pairs are available in the Custom Tap Section of our website or select 2 as the quantity at checkout.

Can I order more than the quantity currently shown?
-Yes. We often have more available than shown in the listing, but we limit stock numbers online to help maintain our dispatch times. If you would like a larger quantity, please contact us and we can increase the listing.

Are your taps made to order?
-Yes. All of our taps are made to order with a usual dispatch time of 3–5 working days. If your order is urgent, please contact us before purchasing, as earlier dispatch can often be arranged.

Can I return the tap if it is unsuitable?
-.This specific listing is for a custom size made to measure tap which is made specifically to your own measurements therefore it is generally not refundable. Please study the sizes of this tap carefully - this is an extra tall option.

This tap is a bespoke size & made to your own specific measurements -  Bespoke items are exempt from The Consumer Act 2015 and Distance Selling Regulations and cannot be returned if you have mis-measured or it is unsuitable.

The measurements available are not suitable for me, can the taps be made any taller or shorter? -This style is available in a range of sizes including shorter dimensions please see our Custom Size Tap Collection for our complete range of made to measure styles and sizes.

What size is the tap?
-Please refer to the listing photographs and dimensions section for exact measurements

Do you sell other copper and brass tap styles?
-Yes. We offer over 20 styles, including single taps, pillar taps, wall-mounted taps, and mixer taps. Visit our complete Tap Collection for our full range.

What size is the water inlet pipework?
-All of our taps have a standard UK 15mm copper water inlet pipe below the counter. even if the visible copper is 22mm as in this case

Will the 15mm pipework fit if I am buying from outside the UK?
-Our taps are made with standard UK 15mm inlet pipework, so suitability will depend on the plumbing standard in your country. In many cases, where local pipework is a different size, adaptors are available. We recommend checking that a suitable adaptor can be sourced locally if needed, before purchase if you are ordering from outside the UK.

Can this tap be fitted directly into a basin or sink hole?
-No. This tap is designed to be fitted onto a countertop, not into pre-cast basin or sink holes. It is secured to your countertop from above using the three screws provided rather than a back nut underneath.

Can this tap be used with a bath?
- This will be suitable for some baths but please be sure your bath pipework is 15mm as this can be different particularly in some older houses.

Can this tap be fitted in a camper van or shepherd’s hut?
-Yes. Our taps are often used in camper vans, shepherd’s huts, and horse box conversions. Please note that camper van pipework is often smaller than standard 15mm, so a reducing fitting may be required.

Can this be used outdoors?
-Yes. All of our taps are suitable for outdoor use.

How do I connect the tap to my water inlet?
-The tap is supplied as a complete fitting pre soldered with 15mm copper pipe below the counter. Your mains water inlet can be connected using soldered, compression, or push-fit fittings.

Can this be fitted to quartz, granite, marble, concrete, or slate worktops?
-We do not recommend fitting to these surfaces. The taps are secured from above with screws into the worktop, so they are best suited to wooden or laminate surfaces.

How do I keep the copper and brass shiny?
-Copper and brass will naturally tarnish over time. To keep them polished, we recommend a quick clean every week or two using Brasso wadding or a similar metal polish. If you prefer a darker, aged patina, simply leave the metal unpolished and it will develop naturally over time.

When will my order arrive?
-Our usual dispatch time is 3–5 working days as each tap is made to order. Orders are normally sent by Royal Mail Tracked 48, or Tracked 24 for urgent orders where agreed.

Need some advice before you buy?
-If our live chat is available, you'll be connected directly with Louise or Martin – never a chatbot.

If live chat is offline, simply email louise@allthingsfrenchstore.com, complete our contact form, or leave a voicemail on 01772 494985. We aim to reply to all enquiries within one working day, often much sooner