Industrial Style Brass Wall Mounted Kitchen or Bathroom Tap

Add timeless charm to your kitchen, bathroom, or utility space with this vintage style polished tap. Featuring a brass tap head, this tap is both practical and beautifully designed.

Perfect for pairing with a Belfast sink or with one of our French copper basins, it brings rustic elegance and a touch of authentic vintage style to any home.

This tap is designed for fitting directly on to the front of a wall and is supplied with 3 fitting screws for easy installation. Built with durability in mind, it has a polished finish and a continuous water flow without an aerator, with a similar flow to an outdoor tap. The taps we sell are not mass produced, they are made to order by our production partner, Lea Gas & Heating.

🔑 Key Features:

• 15mm copper inlet pipework with a 3/4  inch brass tap head
  
• Rustic continuous water flow (no aerator)
• Supplied with 3 fitting screws for installation
• Suitable for kitchen sinks, bathroom basins, camper vans, and outdoor sinks
• Hand-polished for a vintage-style finish
  
• Each tap is made to order, ensuring a perfect fit for your  bathroom, cloakroom, camper van, utility room or garden sink.

🛠️ Fitting Notes:

• Inlet pipe: 15mm standard UK copper connection
• Supplied as one complete piece, does not dismantle
• Fitted by screwing into the front of the wall
• Full access to the pipes behind your wall needed for fitting
  
• Still got QUESTIONS ❓See our FAQ section at the bottom of the listing.

📏Dimensions:

• Outlet projection from wall to spout centre pipe centre 13cm 
• 15mm tail connection (water inlet pipe)- standard UK residential pipe size
  

⏰ Dispatch Notes:

• Made to order in 3–5 working days.
• Contact us before purchase for urgent requests.
• Please measure carefully before ordering.

✨ More to Discover:
Browse our website shop below for over 300 handpicked vintage French homewares and garden ideas, all sourced directly from French markets, now including over 20 tap styles and basins sold on behalf of our partner store Lea Gas & Heating -see Taps section here

🏠Visit our shop home page here:
www.allthingsfrenchstore.co.uk

🚚 Shipping Information:
FREE UK Delivery - All orders include fully tracked shipping at no extra cost. Not going to be home? At checkout select 'Ship to pickup point' to send your order to a local Parcel shop & collect at a time to suit you.

❓FREQUENTLY ASKED QUESTIONS❓

Are your taps suitable for use in a commercial setting?
- All the taps we sell are designed for use in a domestic setting only, either indoor or outdoor. They are not sold as suitable for commercial premises.

Can I buy this as a pair?
-Yes, you can buy a pair here - pair of wall taps .

If this is unsuitable, can I return it?
- Yes, returns are accepted if the item is unsuitable, provided it is in its original condition and has not been fitted. As all of our taps are handmade to order by our production partner, Lea Gas & Heating Services, we kindly ask customers to take careful measurements before placing an order to help minimise unnecessary returns for our small business.

These measurements available are not suitable for me, can the tap be made any longer?
-This tap can be purchased as a made to measure option up to 32cm projection here.

Do you sell any other style of copper and brass taps?
-Yes we do. See the tap section of our website where you will find over 20 different styles including single and pairs of pillar taps, more wall mounted taps as well as a beautiful mixer tap in copper and brass.

What size is this tap head?
-Please see measurements on the photographs in the listing for exact sizes.

What size is the water inlet pipework for this tap?
-All our taps have the standard 15mm water inlet pipework, this is the pipe behind the wall where the water is connected. 

Can this tap be fitted directly into a basin or sink?
-No, this tap does not fit into basin or sink pre cast holes. This is designed to fit into a wall. This is fitted by screwing the brass base into the wall using the screws provided. This is not fitted using a back nut.

Is this tap suitable for a bath?
-This tap will be suitable for some baths, although this style is generally sold for basins and sinks as it has a water inlet pipe which is a 15mm diameter. Some baths, particularly in older houses have a water inlet pipe of 22mm. Please check with your plumber or fitter if you are unsure of your pipe size if you are buying for a bath, or message us for advice.

Can this be fitted in a shepherds hut?
-Yes this can be fitted in a shepherds hut, we have sold many of these for camper vans, shepherds huts and horse box conversions. NB. Camper van pipework is usually smaller than standard 15mm so you will need to use a reducing fitting to join this to the inlet pipe. These are readily available at any plumbers or DIY merchant.

Can I use this as an outdoor tap?
-Yes, this tap is suitable for outdoor use.

How do I connect this to my water inlet?
-This style of wall-mounted tap is designed to be fitted by securing it directly to the front of the wall. Please note that none of our wall-mounted taps are designed to come apart – each one is sold as a complete, soldered unit. To install this type of tap, you will need full access to the pipework behind your wall. For this reason, we recommend checking with your plumber (or contacting us) before purchasing to ensure this style is suitable for your installation.

-The water inlet pipe can be connected to the tail end using soldering, compression fittings, or push-fit connectors.

-We also stock an alternative version designed specifically for use with surface-mounted exposed pipework. See the Tap Section of our website

I have surface exposed mounted copper pipework, do you have taps that can be used for this type of fitting arrangement?
- Yes we do. If you have a surface mounted/exposed copper pipe we can make any of our tap heads to fit exposed pipe - message for details. We have a couple of these already listed -  See the Tap Section of our website

Can this tap be fitted as a direct replacement for my existing wall mounted tap?
- Probably not. This tap is made to be fitted from the front on walls where existing access behind is available, this is usually where a house is having a refit or a new build rather than as a direct swap. This unit does not come apart and it cannot be fitted to copper pipe protruding from an existing wall. The water inlet pipe must be connected behind the wall. Please check with your fitter or message for advice before buying if you are unsure. If you have a surface mounted/exposed copper pipe, this may fit -  we have a tap option which can be used without needing access to behind the wall. See the Tap Section of our website

How often will I need to polish my tap to keep it shiny and what should I use?
- Copper and brass are metals that naturally tarnish over time if left unpolished. A quick buff up every week or 2 will keep it shiny. We use Brasso wadding to keep our taps shiny. This is available at most supermarkets. Rub some wadding over the taps, let it dry for 15 minutes and buff it off with a yellow duster. If you would prefer the more rustic natural brown patina of copper then leave them unpolished and this colour will develop over time.

When will my order arrive?
-All our taps are made to order with a usual dispatch time of 3-5 working days after purchase. Please contact us via the contact form or live chat before buying if your order is urgent as these can occasionally  be sent earlier depending on our current orders. Not going to be home? At checkout select 'Ship to pickup point' to send your order to a local Parcel shop & collect at a time to suit you.

I have another question or I need some more advice about what tap to buy, can you help?
-Yes we can. These are made by Martin who is a gas engineer and plumber. He is more than happy to answer questions regarding tap size, style and fitting. Please message us via the website contact form or live chat for an immediate response.