Skip to product information
1 of 12

All Things French Store

Custom Size Made to Order Brass and Copper Wall Tap, Kitchen or Bathroom Wall Tap

Custom Size Made to Order Brass and Copper Wall Tap, Kitchen or Bathroom Wall Tap

Regular price $128.00 USD
Regular price Sale price $128.00 USD
Sale Sold out
Shipping calculated at checkout.
Projection
Important - Made-to-Measure Order

This style of tap is handmade to your specified measurements. Please check all measurements and fitting requirements before ordering.

Add timeless charm to your kitchen, bathroom, or utility space with this single (ONE TAP) vintage style polished tap. Featuring 15mm copper pipework and a solid brass tap head with detachable nozzle; this is both practical and beautifully designed.

Perfect for pairing with a Belfast sink or with one of our French copper basins, it brings rustic elegance and a touch of authentic vintage style to any home.

Important:

  • This tap is supplied as a complete, pre-soldered unit. 
  • The tap head, body and wall flange is permanently joined and cannot be separated.
  • Please see the fitting information image and FAQ before ordering.

This is designed for fitting directly on to the front of a wall and is supplied with 3 fitting screws for easy installation. Built with durability in mind, it has a polished finish and a continuous water flow without an aerator, with a similar flow to an outdoor tap. The taps we sell are not mass produced, they are made to order in the UK by our production partner, Martin from Lea Gas & Heating.

Key Features

  • 15mm copper inlet pipework - standard UK size
  • 1/2  inch brass tap head with detachable nozzle
  • Rustic continuous water flow (no aerator)
  • Supplied with 3 fitting screws for installation
  • Suitable for kitchen sinks, bathroom basins, camper vans, and outdoor sinks
  • Hand-polished for a vintage-style finish 
  • Each tap is made to order, ensuring a perfect fit for your  bathroom, cloakroom, camper van, utility room or garden sink.

Fitting Information

  • Tap head:1/2 inch solid brass
  • Pipe fittings: 15mm standard UK fittings 
  • This is sold as a complete pre soldered unit and you will need full access to the pipes behind your wall to fit this
  • Removeable nozzle for flexibility of use both indoor and outdoor
  • Fitted by screwing brass plate to the front of the wall with provided screws
  • Connected to your water inlet behind the wall
  • See FAQ section below for full fitting advice 

Dimensions

  • Outlet projection from wall to spout centre pipe centre 16cm - 25cm 
  • 15mm tail connection (water inlet pipe)- standard UK residential pipe size

Perfect for

  • Shepherds hut installations
  • French copper basins
  • Utility rooms and boot rooms
  • Bathroom basin projects
  • Farmhouse or country style kitchens
  • Camper van conversions
  • Outdoor sink areas
  • Traditional and country-style interiors.

Please Remember

Our bespoke taps are made to your individual specifications and are exempt from the standard 14-day cancellation rights under the Consumer Contracts Regulations 2013. We cannot accept change-of-mind returns, including where incorrect measurements or unsuitable fittings have been ordered. Please check all measurements carefully before purchasing. This does not affect your statutory rights.

Condition & Authenticity

This is a new hand crafted tap produced to order in the UK by our trusted production partner, Martin from Lea Gas & Heating, and sold through our store to compliment our vintage and antique French finds. It is crafted in solid copper and brass with a vintage-inspired design, offering the character of antique-style fittings with the practicality of a newly made item.

Discover More

Over 300 handpicked vintage French homewares and garden finds are available on our website alongside over 20 different tap styles including mixer taps
Browse our full collection at:
www.allthingsfrenchstore.com

UK Shipping

All taps are individually made to order, and are usually ready for dispatch within 5–10 working days. As this can vary, for the most accurate current timescale, please check the dispatch and delivery dates shown below. We can often accommodate earlier dispatch if needed — simply contact us before ordering and we'll be happy to advise on the earliest possible dispatch date. 

International Shipping

We are now shipping our taps and basins to a limited number of countries outside the UK including USA - Unfortunately we cannot ship taps to the EU or Ireland - **For taps please be sure to check your pipe size matches the UK standard 15mm.

**For Basins please check that you can accommodate the standard 1 &1/4 inch basin waste that is supplied**

*Combined shipping* - If you are buying a basin or taps with any other item, please contact us first so we can combine overseas postage

Frequently Asked Questions

Is this suitable for commercial use?
- No. All of our taps are designed for domestic use only, indoors or outdoors, and are not sold as suitable for commercial premises.

Can I order more than the quantity currently shown?
-Yes. We often have more available than shown in the listing, but we limit stock numbers online to help maintain our dispatch times. If you would like a larger quantity, please contact us and we can increase the listing.

Are your taps made to order?
-Yes. All of our taps are made to order in the UK by Martin from lea Gas and Heating - AKA my husband. he is a gas engineer and plumber with over 40 years experience. 

These measurements are not suitable for me, can these be made to different measurements?                                                                            -This tap is made to measure at no extra cost within the dimension options, There is a little room for adjustment and we will do our best to accommodate. Please contact us with your sizes and we will check that they can be made to your requirements. 

Can I return the tap if it is unsuitable?
-All our bespoke taps are individually manufactured to the measurements and specifications provided by each customer.

Under Regulation 28(1)(b) of the Consumer Contracts Regulations 2013, goods made to a customer's individual specifications are exempt from the standard 14-day cancellation rights.

We therefore cannot accept change-of-mind returns for bespoke taps that have been correctly manufactured to the agreed specifications. This includes incorrect measurements supplied by the customer, unsuitable fittings or a change of mind after ordering. 

Please check all measurements and requirements carefully before placing your order.

Your statutory rights under the Consumer Rights Act 2015 remain unaffected.

Do you sell other copper and brass tap styles?
-Yes. We offer over 20 styles, including single taps, pillar taps, wall-mounted taps, and  deck mounted mixer taps. Please see our Copper Sinks and Taps section for the full range.

What size is the water inlet pipework?
-All of our taps have a standard UK 15mm copper water inlet pipe for attaching behind your fitting wall. If you have purchased a 22m tap - the exposed pipe is 22mm but the mains water inlet pipe is still a standard 15mm

I have exposed pipework - Do you sell an option for this?
-Yes we do - please see the Wall Mounted Tap Collection on the website for this option

What will I receive and do I need to assemble it myself?
-You will receive 1 x tap with pre soldered wall brackets and copper fitting pipe ready to fit. This includes fitting screws. The tail end copper pipe is supplied - this does not come off for fitting - it is pre soldered and you will need full access to the pipes behind your wall to fit this. 

How do I connect the tap to my water inlet?
- All of our wall mounted taps are designed to be fitted by screwing the complete unit directly onto the front of the wall.                                  Please note that this tap is supplied as a fully soldered, complete unit and does not come apart. Full access to the pipework behind the wall will be required in order to connect the tap to your water supply.           Before purchasing, please ensure that your installation allows the tap to be mounted in this way and that the pipework can be connected from behind the wall. If you are unsure, we recommend checking with your plumber before ordering, or contacting us for advice.                   The water inlet pipe can be connected to the tail end using soldered fittings, compression fittings or suitable push-fit fittings, depending on your installation requirements.

Will the 15mm pipework fit if I am buying from outside the UK?
-Our taps are made with standard UK 15mm inlet pipework, so suitability will depend on the plumbing standard in your country. In many cases, where local pipework is a different size, adaptors are available. We recommend checking that a suitable adaptor can be sourced locally if needed, before purchase if you are ordering from outside the UK.

Can this be fitted directly into a basin or sink hole?
-No. This does not fit into basin or sink pre cast holes. It is designed to fit onto a wall. TI is secured by screwing the brass base into the wall using the screws provided. It does not use a back nut.

Can this be used with a bath?
-This will be suitable for some baths, although these style are generally sold for basins and sinks as they have a water inlet pipe which is 15mm. Some baths, particularly in older houses have a water inlet pipe of 22mm. Please check with your plumber or fitter if you are unsure of your pipe size if you are buying this for a bath.

Can this be fitted in a camper van or shepherd’s hut?
-Yes. Our taps are often used in camper vans, shepherd’s huts, and horse box conversions. Please note that camper van pipework is often smaller than standard 15mm, so a reducing fitting may be required.

Can this be used outdoors?
-Yes. All of our taps are suitable for outdoor use.

Can this be fitted as a direct replacement for my existing wall mounted tap?                                                                                                              -Probably not. This tap is made to be screwed onto walls where existing access behind is available, You need to connect the pre soldered tail end to your water supply behind the wall. This is usually where a house is having a refit or a new build rather than as a direct swap. This is designed and supplied as a complete unit already soldered together, as such it can only be connected to your water supply behind the wall. It cannot be fitted to copper pipe protruding from an existing wall. Please check with your fitter or message for advice before buying if you are unsure.

How do I keep the copper and brass shiny?
-Copper and brass will naturally tarnish over time. To keep them polished, we recommend a quick clean every week or two using Brasso wadding or a similar metal polish. If you prefer a darker, aged patina, simply leave the metal unpolished and it will develop naturally over time.

When will my order arrive?
-Our usual dispatch time is 5-10 working days as each tap is made to order. If your order is urgent, please contact us beofre buying for he earliest available dispatch date. Orders are normally sent by Royal Mail Tracked 48, or Tracked 24 for urgent orders where agreed. 

Need some advice before you buy?
-Simply email louise@allthingsfrenchstore.com, complete our contact form, or leave a voicemail on 01772 494985. We aim to reply to all enquiries within one working day, often much sooner.

View full details