Industrial Style Copper and Brass Wall Kitchen Tap, Bathroom Wall Mounted Tap

Add timeless charm to your kitchen, bathroom, or utility space with this vintage style polished tap. Featuring 22mm chunky copper pipework and a brass tap head with detachable nozzle; this tap is both practical and beautifully designed.

Perfect for pairing with a Belfast sink or with one of our French copper basins, it brings rustic elegance and a touch of authentic vintage style to any home.

This tap is designed for fitting directly on to the front of a wall and is supplied with 3 fitting screws for easy installation. Built with durability in mind, it has a polished finish and a continuous water flow without an aerator, with a similar flow to an outdoor tap. The taps we sell are not mass produced, they are made to order by our production partner, Lea Gas & Heating.

🔑 Key Features:

• 15mm copper inlet pipework
• 3/4  inch brass tap head with detachable nozzle
• 22mm exposed pipework for a chunkier feel
• Rustic continuous water flow (no aerator)
• Supplied with 3 fitting screws for installation
• Suitable for kitchen sinks, bathroom basins, camper vans, and outdoor sinks
• Hand-polished for a vintage-style finish 
• Each tap is made to order, ensuring a perfect fit for your  bathroom, cloakroom, camper van, utility room or garden sink.

🛠️ Fitting Notes:

• Inlet pipe: 15mm standard UK copper connection
• Supplied as one complete piece, it does not dismantle
• Fitted by screwing into the front of the wall via the brass plate
• Full access to the pipes behind your wall needed for fitting
  
• Still got QUESTIONS ❓See our FAQ section at the bottom of the listing.

📏Dimensions:

• Outlet projection from wall to spout centre pipe centre 23cm 
• 15mm tail connection (water inlet pipe)- standard UK residential pipe size
• 22mm chunkier exposed pipe
• Available as a bespoke size option - here

⏰ Dispatch Notes:

• Made to order in 3–5 working days unless a different timeframe has been pre-agreed.
• Contact us before purchase for urgent requests.
  

✨ More to Discover:
Browse our website shop below for over 300 handpicked vintage French homewares and garden ideas, all sourced directly from French markets, now including over 20 tap styles and basins sold on behalf of our partner store Lea Gas & Heating -see Taps section here

🏠Visit our shop home page here:
www.allthingsfrenchstore.co.uk

🚚 Shipping Information:
FREE UK Delivery - All orders include fully tracked shipping at no extra cost. Not going to be home? At checkout select 'Ship to pickup point' to send your order to a local Parcel shop & collect at a time to suit you.

❓FREQUENTLY ASKED QUESTIONS❓

Are your taps suitable for use in a commercial setting?
- All the taps we sell are designed for use in a domestic setting only, either indoor or outdoor. They are not sold as suitable for commercial premises.

Can I buy this as a pair?
-Yes, for a pair please see here pair of wall taps

If this is unsuitable, can I return it?
-Yes, this can be returned if it is unsuitable as long as it is in original condition and unfitted. However, as a small business that makes all our taps to order, they are not an item we stock, we would appreciate careful measurements before ordering in order to keep our losses to a minimum. If you are having a problem with suitability please feel free to contact us and we will always do our best to help resolve any problems or give advice before buying.

These measurements available are not suitable for me, can the tap be made any longer?
- Yes we sell this as a made to measure custom size tap. Please see this option - custom sized tap

Do you sell any other style of copper and brass taps?
-Yes we do. See the tap section of our website where you will find over 20 different styles including single and pairs of pillar taps, more wall mounted taps as well as a beautiful mixer tap in copper and brass.

What size is this tap?
-Please see measurements on the photographs in the listing for exact sizes.

What size is the water inlet pipework for this tap?
-All our taps have the standard 15mm water inlet pipework, this is the pipe behind the wall where the water is connected. Although this has exposed 22mm chunky pipework, the inlet is still 15mm.

Can this tap be fitted directly into a basin or sink?
-No, this tap does not fit into basin or sink pre cast holes. This is designed to fit into a wall. This is fitted by screwing the brass base into the wall using the screws provided. This is not fitted using a back nut.

Is this tap suitable for a bath?
-This tap will be suitable for some baths, although this style is generally sold for basins and sinks as it has a water inlet pipe which is a 15mm diameter. Some baths, particularly in older houses have a water inlet pipe of 22mm. Please check with your plumber or fitter if you are unsure of your pipe size if you are buying for a bath, or message us for advice.

Can this be fitted in a shepherds hut?
-Yes this can be fitted in a shepherds hut, we have sold many of these for camper vans, shepherds huts and horse box conversions. NB. Camper van pipework is usually smaller than standard 15mm so you will need to use a reducing fitting to join this to the inlet pipe. These are readily available at any plumbers or DIY merchant.

Can I use your taps as outdoor taps?
-Yes, all the taps we sell are suitable for outdoor use. This tap has a 1 inch nozzle; standard Hose lock connectors may be smaller - adaptors are easily available if you wish to use this with a snap on connection.  Amazon have one here or they are available at any plumbing shop. 

How do I connect this to my water inlet?
- This style of  wall mounted taps are fitted by screwing onto the front of the wall, none of our wall taps come apart. They are sold as a complete soldered unit and you will need full access to the pipes behind your wall to fit these style of taps as they do not come apart, so please be sure you can fit your tap to the wall in this way or check with your plumber or ourselves before buying. Your water inlet pipe can be attached to the tail end by soldering, compression fittings or push fit fitments. If you have a surface mounted copper water inlet pipe we have a similar style tap to this which can be used without needing access to behind the wall. See here  - Wall mounted Tap

I have surface/wall mounted copper pipework, do you have a tap that can be used for this type of fitting arrangement?
- Yes we do. If you have a surface mounted copper water inlet pipe we have a similar style tap to this which can be used without needing access to behind the wall. See here  - Wall mounted Tap

Can this tap be fitted as a direct replacement for my existing wall mounted tap?
- Probably not. This tap is made to be fitted from the front on walls where existing access behind is available, this is usually where a house is having a refit or a new build rather than as a direct swap. This is designed and supplied as a complete unit already soldered together, as such it can only be fitted from the front of the wall. This means that to connect your water supply you will need full access to the wall behind where the tap is to be fitted. This unit does not come apart and it cannot be fitted to copper pipe protruding from an existing wall. The water inlet pipe must be connected behind the wall. Please check with your fitter or message for advice before buying if you are unsure. For a tap that can be fitted to surface exterior mounted copper pipe see here  - Wall mounted Tap

How often will I need to polish my tap to keep it shiny and what should I use?
- Copper and brass are metals that naturally tarnish over time if left unpolished. A quick buff up every week or 2 will keep it shiny. We use Brasso wadding to keep our taps shiny. This is available at most supermarkets. Rub some wadding over the taps, let it dry for 15 minutes and buff it off with a yellow duster. If you would prefer the more rustic natural brown patina of copper then leave them unpolished and this colour will develop over time.

I am based in Australia - will this fit my pipework?
-All our taps have a water inlet pipe size of 15mm which is UK standard. 15mm copper pipe is common in Australia and we have supplied taps to customers with this pipe size. We would urge you to check that this is the correct size before buying. Australia postage is available at checkout.

When will my order arrive?
-All our taps are made to order with a usual dispatch time of 3-5 working days after purchase.  Please contact us via the contact form or live chat before buying if your order is urgent as these can sometimes be sent earlier depending on current order demand.

I have another question or I need some more advice about what tap to buy, can you help?
-Yes we can. These are made by Martin, our production partner who is a gas engineer and plumber. He is more than happy to answer questions regarding tap size, style and fitting. We are usually in a noisy workshop and are sometimes in France so the best and quickest way to contact us is via the live chat on our website (we usually answer straight away in office hours), you can also email us or use the contact form. If you would prefer a call - please message or live chat your number and we will be happy to call you to discuss your requirements. Alternatively, you can call and leave a message on our landline 01772 494985 and we will get back to you within 24-48 hours.