Brass Vintage Style Tap, Wall Mounted, ideal for Cloakroom, Bathroom, Camper Van

Add timeless rustic charm to your home with this SMALL made to order vintage-style faucet tap. Expertly crafted, it features 15mm copper pipework and a petit solid 1/2 inch brass tap head — perfect for pairing with small sinks, compact copper basins, or for use outdoors.

This tap is designed for fitting directly on to the front of a wall and is supplied with 3 fitting screws for easy installation. Built with durability in mind, it has a polished finish and a continuous water flow without an aerator, with a similar flow to an outdoor tap - see video. The taps we sell are not factory made, they are made to order by our production partner, Lea Gas & Heating.

🔑 Key Features:

• 15mm copper pipework with a VERY SMALL 1/2  inch brass tap head
  
• Rustic continuous water flow (no aerator)
• Supplied with 3 fitting screws for installation
• Suitable for small sinks, bathroom or cloakroom basins, camper vans, and outdoor sinks
• Hand-polished for a vintage-style finish

Each tap is made to order, ensuring a perfect fit for your kitchen, bathroom, camper van, or garden sink.

🛠️ Fitting Notes:

• Inlet pipe: 15mm standard UK copper connection
• Supplied as one complete piece, does not dismantle
• Fitted by screwing into the front of the wall
• Full access to the pipes behind your wall needed for fitting
• See our detailed FAQ section below for full fitting detail & advice

📏Dimensions:

• Outlet projection from wall to spout centre pipe centre 8cm
• Available with a longer projection here:- Made to Measure  Extended Tap
• 15mm tail connection suitable for kitchen sinks and bathroom basins 

⏰ Dispatch Notes:

• Made to order in 3–5 working days.
• Contact us before purchase for urgent requests.
• Please measure carefully before ordering.

🌿 Please Remember:

This tap has a very small tap mini head -please see dimensions on the photographs - it is best suited to a camper van or small cloakroom where the bowl or basin is perhaps just for hand washing.

🚚 Shipping Information:
FREE UK Delivery - All orders include fully tracked shipping at no extra cost. Not going to be home? At checkout select 'Ship to pickup point' to send your order to a local Parcel shop & collect at a time to suit you.

❓FREQUENTLY ASKED QUESTIONS❓

Are your taps suitable for use in a commercial setting?
- All the taps we sell are designed for use in a domestic setting only, either indoor or outdoor. They are not sold as suitable for commercial premises and would not be covered for faults if used other than for domestic use.

Can I buy a pair of these taps?
-Yes, for a pair please see listing Pair Vintage Brass Wall Mounted Taps

I need to buy more than the stock showing on the listing. Do you have more available?
-Yes we do. As we make all our taps to order we limit the number available in listings to ensure we can keep to our dispatch times. If you need more than the quantity listed, please message us and we will increase the number available to buy.

If this is unsuitable, can I return it?
-Yes, if it is unsuitable we are happy to accept returns as long as it is unfitted and in the original condition. However, as tis are made to order, rather than a stock held item, we are only a small business so would appreciate if you could be as sure as you can before ordering and would encourage you to ask for advice if you are unsure in order to keep our costs and losses to a minimum.

The measurements available are not suitable for me, can the tap be made any longer?
-This is available with a longer projection here:- Made to Measure  Extended Tap

Do you sell any other style of copper and brass taps?
-Yes we do. See the Copper Sinks and Taps section of our website shop where you will find over 20 different styles including single and pairs of pillar taps, more wall mounted taps as well as a beautiful mixer tap in copper and brass.

What size is this tap?
- This has a very small tap head, best suited to a smaller basin or sink, it will be too small for a kitchen sink or full size bathroom sink, see measurements on the photographs for exact sizes. Please see measurements on the photographs in the listing for exact sizes.

The tap head is too small for my requirements, do you sell a chunkier tap?
-Yes we do, this tap is made from a dainty small tap head with 15mm copper pipework, we sell other taps in both 1/2 inch size and a chunkier 3/4 inch size which have thicker 22mm pipe rather than the standard 15mm as well as 2 other slightly larger styles. See the Copper Basins, Sinks & Taps section of our website

What size is the water inlet pipework?
-All our taps have the standard 15mm water inlet pipework, this is the pipe behind the wall where the water is connected.

Can this be fitted directly into a basin or sink?
-No, these style of  taps do not fit into basin or sink pre cast holes. They are designed to fit into a wall. They are fitted by screwing the brass base into the wall using the screws provided. They are not fitted using a back nut.

Is this suitable for a bath?
-This tap will be far too small for a bath.

Can this be fitted in a shepherds hut or camper van?
-Yes tall our taps can be fitted in a shepherds hut, we have sold many of these for camper vans, shepherds huts and horse box conversions. NB. Camper van pipework is usually smaller than standard 15mm so you will need to use a reducing fitting to join this to the inlet pipe. These are readily available at any plumbers or DIY merchant.

Can I use your taps as outdoor taps?
-Yes, all the taps we sell are suitable for outdoor use.

How do I connect this to my water inlet?
- All our wall mounted taps are fitted by screwing onto the front of the wall, they do not come apart, they are a sold as complete soldered units and you will need full access to the pipes behind your wall to fit these as they do not come apart, so please be sure you can fit these to the wall in this way or check with your plumber or ourselves before buying. Your water inlet pipe can be attached to the tail end by soldering, compression fittings or push fit fitments.

Can this be fitted as a direct replacement for my existing wall mounted tap?
- Probably not. All our wall mounted taps are made to be fitted from the front on walls where existing access behind is available, this is usually where a house is having a refit or a new build rather than as a direct swap. They are designed and supplied as complete units already soldered together, as such they can only be fitted from the front of the wall. This means that to connect your water supply you will need full access to the wall behind where the tap is to be fitted. They do not come apart and cannot be fitted to copper pipe protruding from an existing wall. The water inlet pipe must be connected behind the wall. Please check with your fitter or message for advice before buying if you are unsure.

I have surface exposed mounted copper pipework, do you have taps that can be used for this type of fitting arrangement?
- Yes we do. If you have a surface/exposed mounted copper water inlet pipe we have this tap option with a suitable wall bracket. See the following listing Copper & Brass Exposed Pipework Tap.

We can make this tap head with a bracket suitable for exposed pipework. please message and we will add a listing to suit.

How often will I need to polish my tap to keep it shiny and what should I use?
- Copper and brass are metals that naturally tarnish over time if left unpolished. A quick buff up every week or 2 will keep it shiny. We use Brasso wadding to keep our taps shiny. This is available at most supermarkets. Rub some wadding over the taps, let it dry for 15 minutes and buff it off with a yellow duster. If you would prefer the more rustic natural brown patina of copper then leave them unpolished and this colour will develop over time.

When will my order arrive?
-All our taps are made to order with a usual dispatch time of 3-5 working days after purchase. Please contact us via online chat or email before buying if your order is urgent as these can also often be sent earlier depending on current demand.

I have another question or I need some more advice about what tap to buy, can you help?
-Yes we can. These are made by Martin, our production partner, who is a gas engineer and plumber. He is more than happy to answer questions regarding tap size, style and fitting. Please message us using either the live chat (this is either Martin or Louise, not a chat bot) or our online contact form where we can arrange for a telephone call  if you prefer.  Alternatively, leave a message on our answerphone at 01772 494985 and we will call you back. We are often out of the country or in a noisy workshop so rarely hear the phone.