Vintage Style Brass and Copper Kitchen Taps, Belfast Sink Taps (T7)

This is a beautiful pair of vintage style taps (2 taps) which have copper pipework and brass tap heads with detachable nozzles. These kitchen or bathroom taps are supplied with 6 fitting screws and would look fabulous with any Belfast sink or alongside the French copper basin and sinks available in our website shop. All the taps we sell are rustic in design and do not have aerators so the flow of water is a continuous stream similar to that of an outdoor tap.
🚰 FITTING: As these are fixed by screws from the top, not from a nut underneath, they are not recommended for a quartz, marble, slate or granite type top. These are recommended for WOODEN AND LAMINATE WORKTOPS ONLY. Please check with your fitter or message for advice before buying if you are unsure. These have been well made and have a nicely polished finish, they comes in one piece not in separate pieces and does not come apart. They have a 15mm standard UK copper water inlet pipes which are suitable for bathroom basins, kitchen sinks, camper van conversions and outdoor sinks but may not be suitable for some baths which have a different size pipe connection, check before buying if these are for a bath.
⏰ DISPATCH TIME   is usually 5 working days after purchase as all our taps are made to order. Accurate dispatch time is displayed at checkout before payment. Please contact us through our online contact page or live chat before buying if your order is urgent as these can often be sent earlier depending on current demand. See our website vintage shop selling over 300 unique, vintage and up cycled French brocante finds for your home and garden including a wide selection of tap styles as well as copper basins and sinks up cycled from French copper jam pans and bowls.

🏠Visit our shop home page here:
www.allthingsfrenchstore.co.uk

QUESTIONS- please see below for the answers to our most frequently asked questions.

total height including tap head (excluding fittings below) 26cm
outlet projection from pipe centre to tap outlet centre 17cm
measurement from tap outlet (excluding detachable) nozzle to base of tap fitment 15cm
15mm tail connections, suitable for standard UK kitchen sinks and bathroom basins (if you are fitting these to a bath, please check with your plumber that they are suitable as bath connections can vary)

🚚 Free tracked postage is by Royal mail tracked 48 for mainland UK and includes Scottish Highlands and Islands and Channel Islands.

FREQUENTLY ASKED QUESTIONS

 Are your taps suitable for use in a commercial setting?
- All the taps we sell are designed for use in a domestic setting only, either indoor or outdoor. They are not sold as suitable for commercial premises.

Can I buy just one of these taps or are they only available as a pair?
-Yes you can, please see listing  - Copper and Brass Kitchen Tap, Bathroom Tap – All Things French Store

These measurements are not suitable for me, can these be made to my own measurements?
-Yes, these taps can be made to measure at no extra cost. Please see listing - Antique Style Copper and Brass Bathroom or Kitchen Taps – All Things French Store

Do you sell any other style of copper and brass taps?
-Yes we do. See the copper Basins and Taps section of our website where you will find 4 or 5 different styles including pillar taps, wall mounted taps and a beautiful mixer tap made from copper and brass.

What size are these taps?
-See photos on each listing for the tap head sizes of all the taps we sell.

What size is the water inlet pipework for these taps?
-All our taps have the standard 15mm water inlet pipework, this is the pipe below the countertop where the water is connected.

Can these taps be fitted directly into a basin or sink?
-No, these taps do not fit into basin or sink pre cast holes. They are designed to fit onto a countertop. They are fitted by screwing the brass base into the top of the counter using the screws provided not from a back nut underneath.

Are these taps suitable for a bath?
-These taps will be suitable for some baths, although they are generally sold for basins and sinks as they have a water inlet pipe which is 15mm. Some baths, particularly in older houses have a water inlet pipe of 22mm. Please check with your plumber or fitter if you are unsure of your pipe size if you are buying these for a bath.

Can these taps be fitted to a quartz, slate or marble type counter top?
- We do not recommend our taps for fitting to this type of worktop as they are secured by small screws into the counter top not from a back nut underneath from above and these type of countertops may not be suitable for the small drill holes required. We are looking to develop a tap for these types of counters but this is still in the design stage.

Can these be fitted in a camper van?
-Yes these can be fitted in a camper van, we have sold many of these for camper van and horse box conversions. Camper van pipework is usually smaller than standard 15mm so you will need to use a reducing fitting to join these to the inlet pipe. These are readily available at any plumbers or DIY merchant.

Can I use these as outdoor taps?
-Yes, these taps are suitable for outdoor use.

How do I connect these to my water inlet under my sink or basin?
-These are sold as complete tap fittings which have the standard UK 15mm copper pipe (tail ends) attached below the counter where they are fitted. Your water inlet pipe can be attached to these tail ends by soldering, compression fittings or push fit fitments.

How often will I need to polish my taps to keep them shiny and what should I use?
-Copper and brass are metals that naturally tarnish over time if left unpolished. A quick buff up every week or 2 will keep it shiny. We use Brasso wadding to keep our taps shiny. This is available at most supermarkets. Rub some wadding over the tap, let it dry for 15 minutes and buff it off with a yellow duster. If you would prefer the more rustic natural brown patina of copper then leave them unpolished and this colour will develop over time.

When will my taps arrive?
-All our taps are made to order with a usual dispatch time of 5 working days after purchase. See checkout for an accurate and up to date delivery estimate. Please contact us  before buying if your order is urgent as these can also often be sent earlier especially depending on current demand.

I have another question or I need some more advice about what tap to buy, can you help?
--Yes we can. These are made by Martin, our production partner, who is a gas engineer and plumber. He is more than happy to answer questions regarding tap size, style and fitting. We are often out of the country or in a noisy workshop so rarely hear the phone. The quickest way to contact us is through the website live chat (you will be speaking to a real person, either Martin or Louise, not a chat bot!) or our online contact form. If you would like a call back please leave your contact details. Alternatively, leave a message on our answerphone at 01772 494985 and we will call you back.