Copper and Brass Kitchen Tap, Belfast Sink Tap, Industrial Farmhouse, Extra Tall (T44)

This is a beautiful single (one tap) hand made copper and brass tap which has been water pressure tested. This has chunky 22mm copper pipework, a 3/4 inch brass tap head and fittings. This is much sturdier and has a chunkier feel than our 1/2 inch taps. This comes supplied with 3 fitting screws and would look fabulous with any Belfast sink or alongside the French copper and brass bathroom/kitchen basin sinks on our other listings. This has been well made and has a nicely polished finish. This has a standard 15mm copper pipe fitting below making it suitable for kitchen sinks and bathroom basins. This may not be suitable for some baths as inlet connections can be different. Check with your plumber or message for advice if this is intended for a bath. All the taps we sell are rustic in design and do not have aerators so the flow of water is a continuous stream similar to that of an outdoor tap.

FITTING: All the taps we sell are fixed by screws from the top, not from a nut underneath, so may not be suitable for a quartz, granite, slate or marble top. They are suitable for wooden and laminate worktops. Please check with your fitter or message for advice before buying any of our taps if you are unsure. Check out our online shop for unique French copper basin sinks made from French copper jam pans. These taps are also available in a slightly different style made with thinner 15mm copper and 1/2inch taps, see tap section. This can also be made to measure at no extra cost, please see listing Custom size option

DELIVERY: All our taps are handmade to order so dispatch time can vary as we travel between the UK and France regularly between March and November, please check the estimated delivery date at checkout for details. This is usually 3-5 days but can be up to 15 working days if we are away. If your order is urgent please contact us before buying.

See our vintage shop selling over 300 unique, vintage and up cycled French finds for your home and garden including our full tap range alongside our unique copper basins and sinks up cycled from French vintage copper cooking pots. Still got QUESTIONS❓See our most FREQUENTLY ASKED QUESTIONS section below

🏠Visit our shop home page here:
www.allthingsfrenchstore.co.uk

This listing is for the measurements below, THIS IS AN EXTRA TALL TAP. For our standard sizes of these taps please see my other listings. For any different sizes please see the Custom made taps.

Total height including tap head (excluding fittings below) minimum 38cm
Clearance height-measurement from tap outlet to base of tap fitment 28cm
Outlet projection from pipe centre to tap outlet centre minimum 17cm
15mm tail connections suitable for kitchen sinks and bathroom basins (These may not suitable for connection to a bath as the inlet pipe may be too small, check with your plumber first if these are to be fitted to a bath)

🚚 Free postage is by tracked DPD or Royal Mail for mainland UK, NI and includes Channel Islands, IOM, Scottish Highlands and Islands. Please check that you have measured accurately before ordering.

❓FREQUENTLY ASKED QUESTIONS❓

Can I buy this as a pair?
-Yes you can. For a pair please see the following listing Copper and Brass Kitchen Belfast Sink Taps,

If this is unsuitable, can I return it for a refund?
-Yes, if this is unsuitable we are happy to accept returns as long as the tap is unfitted and in its original condition. However, as this is made to order, rather than a stock held item, we are only a small business so would appreciate if you could be as sure as you can before ordering and would encourage you to ask for advice if you are unsure in order to keep our costs and losses to a minimum.

These measurements are not suitable for me, can this be made to my own measurements?
-Yes, this tap can be made to measure at no extra cost. Please see listing Vintage Style Handmade Copper and Brass Kitchen Tap,

Do you sell any other style of copper and brass taps?
-Yes we do. See the Copper Sinks and Taps section of our shop where you will find 4 or 5 different styles including single and pairs of pillar taps, more wall mounted taps as well as a beautiful mixer tap in copper and brass.

What size are the taps you sell?
-Please see measurements on the photographs in the listing for exact sizes.

What size is the water inlet pipework for your taps?
-All our taps have the standard 15mm water inlet pipework, this is the pipe below the counter where the water is connected. Although this has exposed 22mm chunky pipework, the inlet is still 15mm.

Can this tap be fitted directly into a basin or sink?
-No, this tap does not fit into basin or sink pre cast holes. This is designed to fit onto a countertop. It is fitted by screwing the brass base into the top of the counter using the screws provided not from a back nut underneath.

Is this tap suitable for a bath?
-This tap will be suitable for some baths, although this style are generally sold for basins and sinks as they have a water inlet pipe which is 15mm. Some baths, particularly in older houses have a water inlet pipe of 22mm. Please check with your plumber or fitter if you are unsure of your pipe size if you are buying for a bath.

Can this tap be fitted to a quartz, slate, concrete or marble type counter top?
-We would not recommend this to be fitted to this type of worktop as it is secured and fitted from above with screws not from underneath with a back nut and these type of countertops may not take the small drill holes required. We would only recommend this for wood and laminate surfaces. We are looking to develop a tap for these types of tops but this is still in the design stage.

Can the taps you sell be fitted in a camper van?
-Yes all our taps can be fitted in a camper van, we have sold many of these for camper van and horse box conversions. Camper van pipework is usually smaller than standard 15mm so you will need to use a reducing fitting to join these to the inlet pipe. These are readily available at any plumbers or DIY merchant.

Can I use this as an outdoor tap?
-Yes, this tap is suitable for outdoor use.

How do I connect this to my water inlet under my sink or basin?
-This is sold as a complete tap fitting which has the standard UK 15mm copper pipe (tail ends) attached below the counter where it is fitted. Your water inlet pipe can be attached to these tail end by soldering, compression fittings or push fit fitments.

How often will I need to polish my tap to keep it shiny and what should I use?
- Copper and brass are metals that naturally tarnish over time if left unpolished. A quick buff up every week or 2 will keep it shiny. We use Brasso wadding to keep our taps shiny. This is available at most supermarkets. Rub some wadding over the taps, let it dry for 15 minutes and buff it off with a yellow duster. If you would prefer the more rustic natural brown patina of copper then leave them unpolished and this colour will develop over time.

When will my order arrive?
-All our taps are made to order with a usual dispatch time of 5 working days after purchase. Please contact us via online contact form or via live chat before buying if your order is urgent as these can occasionally be sent earlier depending on current demand. All our taps are posted by DPD or Royal Mail Tracked 48.

I have another question or I need some more advice about what tap to buy, can you help?
--Yes we can. All our taps are made by Martin, our production partner, who is a gas engineer and plumber. He is more than happy to answer questions regarding tap size, style and fitting. We are often out of the country or in a noisy workshop so rarely hear the phone. The quickest way to contact us is through the website live chat (you will be speaking to a real person, either Martin or Louise, not a chat bot!) or our online contact form. If you would like a call back please leave your contact details. Alternatively, leave a message on our answerphone at 01772 494985 and we will call you back.