Skip to product information
1 of 12

All Things French Store

Brass and Copper Belfast Sink Tap, Farmhouse Kitchen Traditional Sink Tap (T55)

Brass and Copper Belfast Sink Tap, Farmhouse Kitchen Traditional Sink Tap (T55)

Regular price £94.50 GBP
Regular price Sale price £94.50 GBP
Sale Sold out
Shipping calculated at checkout.

This is a beautiful single handmade copper and brass tap (one tap) which has been water pressure tested. This has chunky 22mm copper pipework, and a 3/4 brass tap and fittings. This is much sturdier and has a chunkier feel than my 15mm taps. This is supplied with 3 fitting screws and would look fabulous with any Belfast sink or alongside the French copper and brass bathroom/kitchen basin sinks in our online shop.
All the taps we sell are rustic in design and do not have aerators so the flow of water is a continuous stream similar to that of an outdoor tap.

FITTING: As this tap is fixed by screws from the top, not from a nut underneath, it will not be suitable for a quartz, granite, slate or marble top; this is suitable for wooden and laminate worktops. Please check with your fitter or message for advice before buying if you are unsure. This has been well made and has a nicely polished finish. This has standard 15mm copper pipe fitting below,
NB. This is suitable for standard UK kitchen sinks and bathroom basins. This may not be suitable for some baths as bath water inlet pipes are not always 15mm, check with your plumber first if you are buying these for a bath.

DISPATCH time can vary. It is usually between 3-5 working days but as we travel back to France regularly during the Summer months it can occasionally be up to 15 working days. Please see estimated delivery date and contact us before buying if they are urgent as we can often dispatch within 48 hours when we are in the UK. See our website for a wide range of over 20 different styles of taps and upcycled copper sinks and basins.

To return to our vintage shop home page click here:


Total height including tap head (excluding fittings below) 28cm
Total measurement from tap outlet to base of tap fitment (clearance) 20.5cm
Outlet projection from pipe centre to tap outlet centre 23cm
15mm tail connections suitable for kitchen sinks and bathroom basins (These may not suitable for connection to a bath as the inlet pipe may be too small, check with your plumber first if these are to be fitted to a bath)

Postage is by Royal mail for mainland UK, NI and includes Scottish Highlands and Islands, Channel islands and IOM.


Can I buy this as a pair?
-Yes you can. For a pair please see listing Pair of swan neck tap

I would like to buy more than the number of taps listed as available. Do you have any more than the listing shows?
-Yes we do. We limit the number of taps on each listing in order to keep to our dispatch times but we do have at least 6 of each style of tap ready to make. Please contact us if you want to buy more than the number available and we will increase the listing

Can this be used as a monobloc mixer tap?
-This is a single feed tap so cannot be used as a monobloc. It can be either hot or cold, but not both.

If this is unsuitable, can I return it for a refund?
-Yes, if this is unsuitable we are happy to accept returns as long as the tap is unfitted and in the original condition. However, as this is made to order, rather than a stock held item, we are only a small business so would appreciate if you could be as sure as you can before ordering and would encourage you to ask for advice if you are unsure in order to keep our costs and losses to a minimum. 

These measurements are not suitable for me, can this be made to my own measurements?
-This style of tap can only be made to the measurements listed. Please see our other listings for a range of taps which can be made to measure.

Do you sell any other style of copper and brass taps?
-Yes we do. See the tap section of our website shop where you will find 4 or 5 different styles including single and pairs of pillar taps, more wall mounted taps as well as a beautiful mixer tap in copper and brass.

What size is this tap?
-Please see measurements on the photographs in the listing for exact sizes.

What size is the water inlet pipework for your taps?
-All our taps have the standard 15mm water inlet pipework, this is the pipe below the counter where the water is connected. Although this has exposed 22mm chunky pipework, the inlet is still 15mm.

Can this tap be fitted directly into a basin or sink?
-No, this tap does not fit into basin or sink pre cast holes. This is designed to fit onto a countertop. This is fitted by screwing the brass base into the top of the counter using the screws provided not from a back nut underneath.

Is this tap suitable for a bath?
-This will be suitable for some baths, although these style of taps generally sold for basins and sinks as they have a water inlet pipe which is 15mm. Some baths, particularly in older houses have a water inlet pipe of 22mm. Please check with your plumber or fitter if you are unsure of your pipe size if you are buying these for a bath.

Can your taps be fitted to a quartz, slate or marble type counter top?
-No, the taps we make cannot be fitted to this type of worktop as they are fitted from above and these type of countertops would not take the small drill holes required. We are looking to develop a tap for these types of tops but this is still in the design stage.

Can the taps you make be fitted in a camper van?
-Yes all our taps can be fitted in a camper van, we have sold many of these for camper van and horse box conversions. Camper van pipework is usually smaller than standard 15mm so you will need to use a reducing fitting to join these to the inlet pipe. These are readily available at any plumbers or DIY merchant.

Can I use the taps you sell as outdoor taps?
-Yes, all the taps we sell are suitable for outdoor use.

How do I connect this to my water inlet under my sink or basin?
-This is sold as a complete tap fitting which has the standard UK 15mm copper pipe (tail end) attached below the counter where it is fitted. Your water inlet pipe can be attached to these tail end by soldering, compression fitting or push fit fitment.

How often will I need to polish my tap to keep it shiny and what should I use?
- Copper and brass are metals that naturally tarnish over time if left unpolished. A quick buff up every week or 2 will keep it shiny. We use Brasso wadding to keep our taps shiny. This is available at most supermarkets. Rub some wadding over the taps, let it dry for 15 minutes and buff it off with a yellow duster. If you would prefer the more rustic natural brown patina of copper then leave them unpolished and this colour will develop over time.

When will my order arrive?
-All our taps are made to order with a usual dispatch time of 3-5 days. However, this can occasionally vary as we travel between the UK and France regularly between April-October. Please check the listing for an up-to-date delivery estimate. Contact us via our online chat or contact form before buying if your order is urgent as these can also often be sent earlier especially when we are home in the Winter full time. All our taps are posted by Royal Mail Tracked 48 or 24 if urgent.

I have another question or I need some more advice about what tap to buy, can you help?
-Yes we can. These are made by Martin, our production partner, who is a gas engineer and plumber. He is more than happy to answer questions regarding tap size, style and fitting. As we are out of the country frequently or in a noisy workshop where we cant always hear the phone, the best and quickest way to contact us is via the website Live Chat. This is not a chat bot, it is either Martin or Louise. Alternatively you can use the website contact form or leave a message on our answering machine and we will give you a call back

International Shipping Information

International shipping is not available at checkout as standard for taps and basins, as these are made with UK fitting sizes which may not fit the plumbing in other countries. However, we are happy to accept enquires via our online contact form to discuss your requirements.

View full details