Bespoke Custom Size Vintage Style Copper and Brass Wall Mounted Kitchen Taps (T50)

This is a pair of copper and brass wall mounted taps with copper pipework and brass tap heads. This is also available to buy as a single tap on another one of my listings. THIS IS A BESPOKE MADE TO MEASURE ORDER. Please select the projection you require from the drop down box. Check pictures and description below for available size limitations. These are also available on the website as a standard size, as a pair and also in a 1/2 inch tap and 15mm copper pipe. These brass and copper taps are made from a chunkier 3/4 inch tap, with 22mm copper and come supplied with 6 fitting screws; these would look fabulous with any Belfast sink or alongside the French copper bathroom/kitchen basin sinks on my other listings. All the taps we sell are rustic in design and do not have aerators so the flow of water is a continuous stream similar to that of an outdoor tap. 

🚰FITTING:  All our wall mounted taps are fitted by screwing onto the front of the wall, these do not come apart, they are a sold as a complete soldered unit and you will need full access to the pipes behind your wall to fit these as they do not come apart, so please be sure you can fit this to the wall in this way or check with your plumber or ourselves before buying. NB. These taps are suitable for standard UK kitchen sinks and bathroom basins. They may not be suitable for some baths as bath water inlet pipes are not always 15mm, check with your plumber first if you are buying these for a bath. 

⏰DISPATCH TIME  is usually 5 working days after purchase as all our taps are made to order. Please contact us before buying if your order is urgent as these can occasionally be sent earlier depending on our order book.

See our website vintage shop selling over 300 unique, vintage and up cycled French finds for your home and garden including a wide range of tap styles as well as our up cycled copper basins and sinks. ❓❓QUESTIONS? See our most FREQUENTLY ASKED QUESTIONS section at the bottom of the listing

🏠 Visit our shop home page here:
www.allthingsfrenchstore.co.uk

📏MADE TO MEASURE ORDERS; This listing is for a pair of made to measure taps. Please see measurement parameters below. See website for these as a single tap and for our most popular standard sizes of this tap.

Pipework on show when fitted is a chunky 22mm thick, chunky 3/4 inch brass tap
Outlet projection from wall to spout centre pipe centre 19cm-32cm (please select from the drop down box)
15mm tail connection (back section not seen when fitted

🚚Free tracked postage is by DPD or Royal Mail Tracked 48 for mainland UK, NI and includes Channel Islands, IOM and Scottish Highlands and Islands. See below for international shipping.

❓FREQUENTLY ASKED QUESTIONS

Can I buy just one of these taps?
-Yes, you can, for a single tap see listing single wall tap 

If these are unsuitable, can I return them?
-As these are made to your own custom sizes and are not a stock item, they are generally non refundable. However, please do contact us if you are having an issue after purchase and we will do our best to help. We are only a small business so would appreciate if you could be as sure as you can before ordering and would encourage you to ask for advice if you are unsure in order to keep our costs and losses to a minimum.

The measurements available are not suitable for me, can the taps be made any longer?
-This style cannot be made any longer than 32cm in order that they remains stable

Do you sell any other style of copper and brass taps?
-Yes we do. See the Copper, basins and Taps section of our website shop where you will find 4 or 5 different styles including single and pairs of pillar taps, more wall mounted taps as well as a beautiful mixer tap in copper and brass.

What size are these taps?
-Please see measurements on the photographs in the listing for exact sizes.

What size is the water inlet pipework for these taps?
-Although they pipework on show for these taps is 22mm, all our taps have the standard 15mm water inlet pipework, this is the pipe behind the wall where the water is connected.

Can these be fitted directly into a basin or sink?
-No, these taps do not fit into basin or sink pre cast holes. They are designed to fit into a wall. They are fitted by screwing the brass bases into the wall using the screws provided. They are not fitted using a back nut.

Are these suitable for a bath?
-Our taps will be suitable for some baths, although this style is generally sold for basins and sinks as it has a water inlet pipe which is a 15mm diameter. Some baths, particularly in older houses have a water inlet pipe of 22mm. Please check with your plumber or fitter if you are unsure of your pipe size if you are buying for a bath, or message us for advice.

Can they be fitted in a shepherds hut or camper van?
-Yes they can be fitted in a shepherds hut, we have sold many of these for camper vans, shepherds huts and horse box conversions. NB. Camper van pipework is usually smaller than standard 15mm so you will need to use a reducing fitting to join this to the inlet pipe. These are readily available at any plumbers or DIY merchant.

Can I use your taps outside?
-Yes, all our taps are suitable for outdoor use.

How do I connect these to my water inlet?
- All our wall mounted taps are fitted by screwing onto the front of the wall, these do not come apart, they are a sold as a complete soldered unit and you will need full access to the pipes behind your wall to fit these as they do not come apart, so please be sure you can fit this to the wall in this way or check with your plumber or ourselves before buying. Your water inlet pipe can be attached to the tail end by soldering, compression fittings or push fit fitments.

Can these taps be fitted as a direct replacement for my existing wall mounted taps?
- Probably not. These are made to be fitted from the front on walls where existing access behind is available, this is usually where a house is having a refit or a new build rather than as a direct swap. They are designed and supplied as a complete unit already soldered together, as such they can only be fitted from the front of the wall. This means that to connect your water supply you will need full access to the wall behind where the taps are to be fitted. This unit does not come apart and it cannot be fitted to copper pipe protruding from an existing wall. The water inlet pipe must be connected behind the wall. Please check with your fitter or message for advice before buying if you are unsure.

How often will I need to polish my taps to keep them shiny and what should I use?
- Copper and brass are metals that naturally tarnish over time if left unpolished. A quick buff up every week or 2 will keep it shiny. We use Brasso wadding to keep our taps shiny. This is available at most supermarkets. Rub some wadding over the taps, let it dry for 15 minutes and buff it off with a yellow duster. If you would prefer the more rustic natural brown patina of copper then leave them unpolished and this colour will develop over time.

When will my order arrive?
-All our taps are made to order with a usual dispatch time of 5 working days after purchase. Please contact us via live chat or our online contact form before buying if your order is urgent as these can occasionally be sent earlier depending on our current order book. All our taps are posted by Royal Mail Tracked 48 or 24 if urgent.

I have another question or I need some more advice about what tap to buy, can you help?
-Yes we can. These are made by Martin, our production partner, who is a gas engineer and plumber. He is more than happy to answer questions regarding tap size, style and fitting. As we are out of the country frequently or in a noisy workshop where we cant always hear the phone, the best and quickest way to contact us is via the website Live Chat. This is not a chat bot, it is either Martin or Louise. Alternatively you can use the website contact form or leave a message on our answering machine and we will give you a call back.