Skip to product information
1 of 9

All Things French Store

Vintage Antique Style Brass Kitchen Tap, Brass Bathroom Wall Mounted Tap (T16)

Vintage Antique Style Brass Kitchen Tap, Brass Bathroom Wall Mounted Tap (T16)

Regular price £82.50 GBP
Regular price Sale price £82.50 GBP
Sale Sold out
Tax included. Shipping calculated at checkout.

This is a beautiful single (one) vintage style copper and brass, wall mounted tap, hand made and water pressure tested for leaks. This is a small tap head, ideally suitable for a smaller basin perhaps in a cloakroom or camper van. This tap has an industrial rustic feel with copper pipework, a brass tap head and it comes supplied with 3 fitting screws; this would look fabulous with any smaller basin or sink or alongside the French copper bathroom/kitchen basin sinks in the Copper Basins, Sinks and Taps section of the website shop. All the taps we sell are rustic in design and do not have aerators, so the flow of water is a continuous stream similar to that of an outdoor tap.
FITTING: All our wall mounted taps are fitted by screwing onto the front of the wall, these do not come apart, they are a sold as a complete soldered unit and you will need full access to the pipes behind your wall to fit these as they do not come apart, so please be sure you can fit this to the wall in this way or check with your plumber or ourselves before buying. This hand made tap has a nicely polished finish. If you prefer the more natural patina of copper and brass then this can be achieved by leaving the tap unpolished, over time it will darken to the natural brown copper colour. This is a small tap with 15mm standard UK fittings which is suitable for bathroom basins, small kitchen sinks and camper van conversions but may not be suitable for baths due to its smaller size. In addition, most baths have a different size pipe connection; check with your plumber first if this is intended for a bath and check the measurements. Made to measure at no extra cost, please order from the following listing. Made to Measure Brass and Copper Wall Mounted Kitchen Rustic Industrial Style Taps – All Things French Store

DISPATCH TIME can vary as we travel between the UK and France regularly from March-November. This is usually 3-5 working days but can occasionally be longer if we are away. Please check the listing for an up-to-date delivery estimate. Contact us through the online contact form or via live chat before buying if your order is urgent as these can often be sent earlier especially between Nov-March when we are in the UK full time. See the Copper Basins, Sinks and Taps section of the website shop for a wide selection of tap styles as well as copper basins and sinks up cycled from French copper jam pans and bowls. See our other shop sections for over 300 unique, vintage and up cycled French brocante finds for your home and garden

QUESTIONS? See our most FREQUENTLY ASKED QUESTIONS section below

Pipework is 15mm, inlet is standard 15mm for kitchens + bathroom taps (not suitable for baths),
Projection when wall mounted 150mm (reach out from wall to centre of spout) Can be extended up to 25cm
15mm tail connections (water inlet pipe) NB. suitable for standard UK kitchen sinks and bathroom basins. The connections may not be suitable for some baths as bath water inlet pipes are not always 15mm, check with your plumber first if you are buying for a bath.

Postage is by Royal mail for mainland UK, NI and includes Scottish Highlands and Islands, Channel islands and IOM.

FREQUENTLY ASKED QUESTIONS

Can I buy this as a pair?
-Yes you can, please see the following listing for a pair of these taps. Antique Style Brass and Copper Kitchen Taps – All Things French Store

These measurements are not suitable for me, can the tap be made to my own measurements?
-Yes, this tap can be made to measure at no extra cost. Please see the following listing for a made to measure version of this tap. Made to Measure Brass and Copper Wall Mounted Kitchen Rustic Industrial Style Taps – All Things French Store

Do you sell any other style of copper and brass taps?
-Yes we do. See the Copper Basins, Sinks and Taps section of the website shop where you will find 4 or 5 different styles including single and pairs of pillar taps, more wall mounted taps as well as a beautiful mixer tap in copper and brass.

What size is this tap?
-This tap has a small tap head, best suited to a smaller basin or sink, it may be too small for some kitchen sinks, see measurements on the photographs for exact sizes.

The tap head is too small for my requirements, do you sell a chunkier tap?
-Yes we do, this tap is made from a dainty small tap head with 15mm copper pipework, we sell other taps in both 1/2 inch size and a chunkier 3/4 inch size which have thicker 22mm pipe rather than the standard 15mm as well as 2 other slightly larger styles. See the Copper Basins, Sinks and Taps section of the website shop

What size is the water inlet pipework for this tap?
-All our taps have the standard 15mm water inlet pipework, this is the pipe below the countertop where the water is connected.

Can this tap be fitted directly into a basin or sink?
-No, this tap does not fit into basin or sink pre cast holes. This is designed to fit into a wall. This is fitted by screwing the brass base into the wall using the screws provided. This is not fitted using a back nut.

Is this tap suitable for a bath?
-This tap will be suitable for some baths, although this style is generally sold for basins and sinks firstly because the tap is too small for a bath and secondly as it has a water inlet pip which are 15mm. Some baths, particularly in older houses have a water inlet pipe of 22mm. Please check with your plumber or fitter if you are unsure of your pipe size if you are buying for a bath..

Can this be fitted in a shepherds hut?
-Yes this can be fitted in a shepherds hut, we have sold many of these for camper vans, shepherds huts and horse box conversions. NB. Camper van pipework is usually smaller than standard 15mm so you will need to use a reducing fitting to join this to the inlet pipe. These are readily available at any plumbers or DIY merchant.

Can I use this as an outdoor tap?
-Yes, this tap is suitable for outdoor use.

How do I connect this to my water inlet?
- All our wall mounted taps are fitted by screwing onto the front of the wall, these do not come apart, they are a sold as a complete soldered unit and you will need full access to the pipes behind your wall to fit these as they do not come apart, so please be sure you can fit this to the wall in this way or check with your plumber or ourselves before buying. Your water inlet pipe can be attached to the tail end by soldering, compression fittings or push fit fitments.

Can this tap be fitted as a direct replacement for my existing wall mounted tap?
- Probably not. This tap is made to be fitted from the front on walls where existing access behind is available, this is usually where a house is having a refit or a new build rather than as a direct swap. This is designed and supplied as a complete unit already soldered together, as such it can only be fitted from the front of the wall. This means that to connect your water supply you will need full access to the wall behind where the tap is to be fitted. This unit does not come apart and it cannot be fitted to copper pipe protruding from an existing wall. The water inlet pipe must be connected behind the wall. Please check with your fitter or message for advice before buying if you are unsure.

How often will I need to polish my tap to keep it shiny and what should I use?
- Copper and brass are metals that naturally tarnish over time if left unpolished. A quick buff up every week or 2 will keep it shiny. We use Brasso wadding to keep our taps shiny. This is available at most supermarkets. Rub some wadding over the taps, let it dry for 15 minutes and buff it off with a yellow duster. If you would prefer the more rustic natural brown patina of copper then leave them unpolished and this colour will develop over time.

When will my order arrive?
-All our taps are made to order with a usual dispatch time of 3-5 days. However, this can occasionally vary as we travel between the UK and France regularly between April-October. Please check the listing for an up-to-date delivery estimate. Contact us via Etsy messages before buying if your order is urgent as these can also often be sent earlier especially when we are home in the Winter full time. All our taps are posted by Royal Mail Tracked 48 or 24 if urgent.

I have another question or I need some more advice about what tap to buy, can you help?
-Yes we can. These are made by Martin who is a gas engineer and plumber. He is more than happy to answer questions regarding tap size, style and fitting. Please message him using the online contact form or the live chat option.

International Shipping Information

Our taps and basins are currently only available for shipping within the UK including Channel islands, Highlands and Islands, IOM and NI. For all other areas please contact us for shipping prices and availability

View full details